Heating cable or Warmset’s patented ribbon
Discover the differences
When do you think about electric underfloor heating, you are certainly not thinking about a 2 cm thickness ribbon, but rather of a small thickness cable or a heating film.
But what does differentiate our product from the other competing heaters?
Here are the differences between our product and the traditional heating cable
Our patented ribbon has got a better diffusion of heat thanks to its flat surface able to develop the heat in a more uniform way
A thickness of only 3 mm. Usually a big problem during renovations is the space available. In fact it’s difficult to have enough space for the insulation + heating + floor. Our heating system, thanks to the aluminum support, can also be placed under floating floors, not increasing the total thickness of the flooring too much
Unlike most of the heating cables that come from Asia, our product is 100% developed and produced in Italy. This guarantees after-sales technical support for both the electrical and the construction part
Unlike most of the heating cables that come from Asia, our product is 100% developed and produced in Italy. This guarantees after-sales technical support for both the electrical and the construction part
Self-adhesive product, it’s not necessary pre-glue the ground.
TECHNICAL DATA IN COMPARISON
STANDARD CABLE
- Low density of the cable
- Cover only 10% of the room area
- High temperature of the cable
The cable temperature is high and the hot/cold cycle is very fast
WARMSET RIBBON
- High density of the cable
- Cover 30% of the room area
- Lower temperature of the ribbon
The temperature of the ribbon is lower and the hot/cold cycle is constant and slow
The advantages of Warmset heating compared to the heating film
- Our heating system is not a printed conductive ink but a laminated ribbon with inside two conductors and an electrical grounding. It has got a better yield and greater resistance over the years.
- Our heating system is already equipped with the connection and a power cable. It is not necessary, as for the heating film, to make manually the connections before installation on the construction site (very risky).
- Our heating system is very functional for glued tiles and floors. There is no risk of breaking – as happens for the film.
Would you like to receive more information on the Warmset heating system?
Our team is ready to answer all your requests!